Buy 2.5"×21" Low Energy RO Membrane, 450 GPD M-T2521ALE

2.5"×21" Low Energy RO Membrane, 450 GPD M-T2521ALE

Product Description

AMI Membrane elements, also known as RO filters, are among the finest in the industry. Our membranes, offered in Reverse Osmosis Thin Film (RO Membranes), CTA/CAB, Ultrafiltration, Nanofiltration, Microfiltration and Special Application membrane materials are of the highest quality with performance comparable to most major brands. With hundreds of thousands of membranes in operation world-wide, we offer these in a large range of both residential and commercial sizes AMI Membranes are Made in the USA in our ISO 9001:2008 Certified Facilities. For the past 25 years AMI Membrane elements have earned the reputation of consistent quality.



Performance specifications based on, 2000 mg/l sodium chloride, 150 psi (1.08 MPa) applied pressure, 77°F (25°C) feed water temperature, pH 8 and 10% recovery. Element permeate flow may vary -15%/+25%. Low energy membranes in all sizes are now available from AMI. These membranes produce the same product flow as the earlier models but at a lower pressure (about 50-60% lower). A word of caution: Do not run these membranes at a pressure that will produce more than their rated product flow rate. This will lead to premature fouling of the membrane resulting in drop in permeate flow and higher TDS of the permeate.



Maximum Applied Pressure: 300 psi

Maximum Feed Flow Rate - 2.5" elements: 6 gpm

Maximum Operating Temperature: 113° F (45° C)

Maximum Feed Water Turbidity: 1 NTU

Maximum Feed Water SDI (15min): 4

Chlorine Tolerance:< 0

Feedwater pH Range, continuous operation: 2-11

Feedwater pH Range, short-term cleaning (30 min): 1-12

Single Element recovery %: 15

• Flow Rate: 450 Gal/Day (1,703 L/Day)
• Size: 2.5" Dia x 21" Length
• Stablizied Salt Rej: 99%
• Minimum Salt Rej: 98%
• Low Energy